| Author |
Message |
Posted by:
Dave Wylie
Tuesday, November 03, 2009
09:44 am | I bought a new 2009 GL1800 and ordered the CB for it. I found the thread for installing the CB and I'm pretty sure I can do that with no problem. Trouble is, the first picture on the CB install shows a Goldwing fairly denuded of tupperware - where does one start with that and/or is there a how to book or video I can download so I can get that stuff off and back on without damaging it?? |
Posted by:
John Owens
Tuesday, November 03, 2009
10:37 am | You need a service manual to tell you the procedure, the latest models have changed the procedure from the 2005 and previous years.
You can download a service manual for 2001-2005 models for free:
http://www.goldwingdocs.com/index.asp |
Posted by:
Don Schneider
Tuesday, November 03, 2009
10:38 am | Dave, this link will get you to a page that has directions for removal of tupperware:
http://gl1800riders.com/forums/forumdisplay.php?f= 33
Have fun
Don
|
Posted by:
Bill Mills
Thursday, November 05, 2009
12:55 pm | Here ya go. I did not remove any tupperware or the trunk. I removed the seat, emptied the trunk, and loosened the front shelter so that I could reach my hand in to plug in a connection in the front.
Instructions:
http://www.pbase.com/wingman26/image/23600614 |
