| Author |
Message |
Posted by:
Richard Smith
Sunday, October 25, 2009
02:49 pm | I read here someone had the same problem as I do. Seems that my brake lights and turn signals stopped working. Checked the fuse is ok. This happen once before and fixed itself!! I think I read here that the Rely #3 has a hand in the working of this problem? If not please help with ideas.. If this rely #3 is a part of this wiring, could you give/tell me the number. I think that I read it can be bought at local auto stores, and not just at Mother Honda. Can this rely #3 work sometimes and not at other times????
Thank you for your help/advice........ |
Posted by:
Rolf Dean
Sunday, October 25, 2009
03:52 pm | This is the thread posted below on this subject. Hope it helps.
http://bbs.gwrra.org/board/messages/11/197823.html ?1256425352
Butch USAF,MSGT, EOD Ret  2001  
|
Posted by:
Richard Smith
Sunday, October 25, 2009
06:49 pm | Rolf, Yes your link to former bbs.posting was what I was looking for . I have found that with more than 3+ agreeing as to the problem, it is my best bet to heed  . Tomorrow I will see if I can find a Pilot or any Auto parts store. Here there are mostly Auto Zone Auto Stores . Will see if they may have what I NEED!!!!!!! Thank you for the link, and thank's to those that posted to the question in that link. |
Posted by:
Michael Kane
Sunday, October 25, 2009
11:08 pm | At the Autozone, go to the Driving/Fog Light section and you will find the PLRY1 relay and that is what you are looking for. All that is needed is to trim the mounting tab off. It sticks out too far to get the lid for the relays to close. |
Posted by:
James Jones
Monday, October 26, 2009
05:09 am | Richard The #3 relay does not control the Brake light and turn signal functions. It controls the TAIL LIGHTS AND FUEL GAUGE. It sounds more like you may have a ground problem, or a switch problem.
James I. Jones |
